CPcam 8CH MPEG-4 Manuel d'utilisateur télécharger pdf (Page 54)

•

Step 1

Connect the connector with the HDD (Pic. 1).

•

Step 2

Put HDD into the HDD cartridge with the pins facing outside (Pic. 2).

•

Step 3

Fasten the HDD to the cartridge. Before you fasten the HDD, please be aware

that you must to align the pins of the HDD with the pin marks of the cartridge. Then

fasten the HDD correctly (Pic. 3 & 4). You must precisely align the hard disk to the pin

connection to ensure correct installation.

•

Step 4

Reverse the HDD and put it into DVR (Pic. 5, 6 & 7).

•

Step 5

Lock the HDD slot by turning the key clockwise (Pic. 8).

A ( locked )

B ( unlocked )

•

Step 6

Close the cap (Pic. 9).

4CH

Carefully follow the steps to ensure correct installation.

*** Note: Please set one HDD to “Master Mode” or “Single Mode” ***

Note : If you do not lock the HDD slot, the DVR system will not function properly.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Pas de commentaire

CPcam 8CH MPEG-4 Manuel d'utilisateur Page 54